1. An activity-based costing system should include all of the activities carried out in an organization because any simplification will inevitably result in inaccuracy.
True
False
2. Ladanza Corporation is a wholesaler that sells a single product. Management has provided the following cost data for two levels of monthly sales volume. The company sells the product for $135.00 per unit.
Sales volume (units) 11,000 12,120
Cost of sales $935,000 $1,030,200
Selling and administrative costs $627,000 $644,920
The best estimate of the total contribution margin when 11,410 units are sold is:
$244,250
$501,970
$167,570
$387,940
3.The following costs were incurred in September:
Direct materials $42,700
Direct labor $29,400
Manufacturing overhead $27,300
Selling expenses $23,600
Administrative expenses $33,700
Conversion costs during the month totaled:
$156,700
$72,100
$70,000
$56,700
4. The wages of factory maintenance personnel would usually be considered to be:
Option B
Option D
Option C
Option A
5.
South Company sells a single product for $30 per unit. If variable expenses are 60% of sales and fixed expenses total $13,600, the break-even point in sales dollars will be: (Do not round intermediate calculations.)
$13,600
$22,667
$34,000
$20,400
6.Variable cost:
increases on a per unit basis as the number of units produced increases.
remains constant on a per unit basis as the number of units produced increases.
decreases on a per unit basis as the number of units produced increases.
remains the same in total as production increases.
7.
The contribution margin ratio is 20% for Grain Company and the break-even point in sales is $254,500. To obtain a target net operating income of $69,000, sales would have to be: (Do not round intermediate calculations.)
$323,500
$287,300
$333,000
$599,500
8. At the break-even point: Sales − Variable expenses = Fixed expenses.
True
False
9. Within the relevant range, variable cost per unit will:
increase as the level of activity increases.
remain constant.
decrease as the level of activity increases.
none of these.
10.
The contribution margin ratio of Thronson Corporation’s only product is 69%. The company’s monthly fixed expense is $455,400 and the company’s monthly target profit is $41,400.
Required:
Determine the dollar sales to attain the company’s target profit. (Omit the “$” sign in your response.)
Target profit $
11.Washtenaw Corporation uses a job-order costing system. The following data are for last year:
Washtenaw applies overhead using a predetermined rate based on direct labor-hours. What predetermined overhead rate was used last year?
$3.36 per direct labor-hour
$3.25 per direct labor-hour
$3.55 per direct labor-hour
$3.08 per direct labor-hour
12. Wert Corporation uses a predetermined overhead rate based on direct labor cost to apply manufacturing overhead to jobs. Last year, the company’s estimated manufacturing overhead was $1,200,000 and its estimated level of activity was 50,000 direct labor-hours. The company’s direct labor wage rate is $12 per hour. Actual manufacturing overhead amounted to $1,240,000, with actual direct labor cost of $650,000. For the year, manufacturing overhead was:
overapplied by $60,000
overapplied by $40,000
underapplied by $60,000
underapplied by $44,000
13. A company has provided the following data:
If the sales volume decreases by 25%, the variable cost per unit increases by 15%, and all other factors remain the same, net operating income will:
decrease by $3,125.
decrease by $15,000.
increase by $20,625.
decrease by $31,875.
14.Slonaker Inc. has provided the following data concerning its maintenance costs:
Machine-Hours Maintenance
Cost
April 5,820 $30,400
May 5,803 $30,310
June 5,785 $30,258
July 5,782 $30,254
August 5,738 $30,099
September 5,816 $30,381
October 5,851 $30,430
November 5,822 $30,399
December 5,806 $30,339
________________________________________
Management believes that maintenance cost is a mixed cost that depends on machine-hours.
Required:
Estimate the variable cost per machine-hour and the fixed cost per month using the high-low method.(Round your “Variable cost” to 2 decimal places. Omit the “$” sign in your response.)
Variable cost per machine-hour $
Fixed cost per month $
________________________________________
15. Jurper Corporation used $150,000 of direct materials during April. At the end of April, Jurper’s direct materials inventory was $25,000 more than it was at the beginning of the month. Direct materials purchases during the April amounted to:
$150,000
$175,000
$0
$125,000
16. Butteco Corporation has provided the following cost data for last year when 100,000 units were produced and sold:
All costs are variable except for $100,000 of manufacturing overhead and $100,000 of selling and administrative expense. There are no beginning or ending inventories. If the selling price is $10 per unit, the net operating income from producing and selling 110,000 units would be:
$385,000
$560,000
$405,000
$450,000
17.
Mark Corporation produces two models of calculators. The Business model sells for $56, and the Math model sells for $35. The variable expenses are given below:
Business
Model Math
Model
Variable production costs per unit $12 $12
Variable selling and administrative expenses per unit $10 $ 6
The fixed expenses are $76,300 per month. The expected monthly sales of each model are: Business, 1,000 units; Math, 400 units.
The break-even point in unit sales for the expected sales mix is closest to: (Do not round intermediate calculations.)
1,870 Business Model and 748 Math Model
1,870 of each product
748 of each product
748 Business Model and 1,870 Math Model
18.Christiansen Corporation uses an activity-based costing system with the following three activity cost pools:
The Other activity cost pool is used to accumulate costs of idle capacity and organization-sustaining costs.
The company has provided the following data concerning its costs:
The distribution of resource consumption across activity cost pools is given below:
The activity rate for the Order Processing activity cost pool is closest to:
$676 per order
$780 per order
$312 per order
$560 per order
19. Underapplied or overapplied manufacturing overhead represents the difference between actual overhead costs and applied overhead costs.
True
False
20. An activity-based costing system that is designed for internal decision-making will not conform to generally accepted accounting principles because:
some manufacturing costs (i.e., the costs of idle capacity and organization-sustaining costs) will not be assigned to products.
some non-manufacturing costs are assigned to products.
first-stage allocations may be based on subjective interview data.
all of the above are reasons why an activity-based costing system that is designed for internal decision-making will not conform to generally accepted accounting principles.
21.
The following information pertains to Clove Co.:
Budgeted sales $1,080,000
Breakeven sales $ 620,000
Budgeted contribution margin $ 520,000
Clove’s margin of safety is:
$460,000
$720,000
$660,000
$560,000
22.
The following information relates to Clyde Corporation which produced and sold 57,000 units last month.
Sales $1,368,000
Manufacturing costs:
Fixed $210,000
Variable $205,100
Selling and administrative:
Fixed $300,000
Variable $ 45,700
There were no beginning or ending inventories. Production and sales next month are expected to be 47,000 units. The company’s unit contribution margin next month should be: (Round your intermediate calculations and final answer to 2 decimal places)
$19.60
$23.56
$3.80
$9.38
23. In a contribution format income statement, sales minus cost of goods sold equals the gross margin.
True
False
24. In activity-based costing, some manufacturing costs may be excluded from product costs.
True
False
25. Activity-based costing is a costing method that is designed to provide managers with product cost information for external financial reports.
True
False
26.
Umanzor Corporation uses activity-based costing to assign overhead costs to products. Overhead costs have already been allocated to the company’s three activity cost pools as follows: Processing, $51,500; Supervising, $35,800; and Other, $26,600. Processing costs are assigned to products using machine-hours (MHs) and Supervising costs are assigned to products using the number of batches. The costs in the Other activity cost pool are not assigned to products. Activity data appear below:
MHs (Processing) Batches (supervising)
Product S5 15,300 1,060
Product F5 1,180 820
Total 16,480 1,880
The activity rate for the Processing activity cost pool under activity-based costing is closest to:
$2.81 per MH
$3.13 per MH
$7.56 per MH
$3.43 per MH
27.
McCaskey Corporation uses an activity-based costing system with the following three activity cost pools:
Activity Cost Pool Total Activity
Fabrication 10,000 machine-hours
Order processing 125 orders
Other N/A
The Other activity cost pool is used to accumulate costs of idle capacity and organization-sustaining costs.
The company has provided the following data concerning its costs:
Wages and salaries $435,000
Depreciation 134,000
Occupancy 182,000
Total $751,000
The distribution of resource consumption across activity cost pools is given below:
Activity Cost Pools
Fabrication Order
Processing Other Total
Wages and salaries 10% 80% 10% 100%
Depreciation 25% 25% 50% 100%
Occupancy 5% 75% 20% 100%
The activity rate for the Fabrication activity cost pool is closest to:
$2.56 per machine-hour
$0.96 per machine-hour
$18.78 per machine-hour
$8.61 per machine-hour
28. Desrevisseau Inc., a manufacturing company, has provided the following data for the month of August. The balance in the Work in Process inventory account was $10,000 at the beginning of the month and $22,000 at the end of the month. During the month, the company incurred direct materials cost of $63,000 and direct labor cost of $39,000. The actual manufacturing overhead cost incurred was $40,000. The manufacturing overhead cost applied to Work in Process was $43,000. The cost of goods manufactured for August was:
$142,000
$130,000
$133,000
$145,000
29. In a job-order costing system, direct labor cost is ordinarily debited to:
Finished Goods.
Manufacturing Overhead.
Work in Process.
Cost of Goods Sold.
30. The break-even point in unit sales is found by dividing total fixed expenses by:
the sales price per unit.
the contribution margin per unit.
the variable expenses per unit.
the contribution margin ratio.
31. Supply costs at Lattea Corporation’s chain of gyms are listed below:
Client-Visits Supply Cost
March 11,653 $28,567
April 11,449 $28,401
May 11,981 $28,825
June 12,600 $28,904
July 11,713 $28,628
August 11,199 $28,227
September 11,993 $28,826
October 11,684 $28,584
November 11,832 $28,709
Management believes that supply cost is a mixed cost that depends on client-visits. Using the high-low method to estimate the variable and fixed components of this cost, those estimates would be closest to:(Round your Variable cost per unit to 2 decimal places.)
$1.06 per client-visit; $15,798 per month
$0.52 per client-visit; $22,351 per month
$0.48 per client-visit; $22,856 per month
$2.17 per client-visit; $28,629 per month
32. In May, Hervey Inc. incurred $60,000 of direct labor costs and $3,000 of indirect labor costs. The journal entry to record the accrual of these wages would include a:
debit to Work in Process of $63,000
credit to Manufacturing Overhead of $3,000
credit to Work in Process of $63,000
debit to Manufacturing Overhead of $3,000
33.
At the beginning of the year, manufacturing overhead for the year was estimated to be $266,400. At the end of the year, actual direct labor-hours for the year were 22,500 hours, the actual manufacturing overhead for the year was $264,300, and manufacturing overhead for the year was overapplied by $5,700. If the predetermined overhead rate is based on direct labor-hours, then the estimated direct labor-hours at the beginning of the year used in the predetermined overhead rate must have been: (Round your intermediate calculations to 2 decimal places.)
21,800 direct labor-hours
22,200 direct labor-hours
20,700 direct labor-hours
22,500 direct labor-hours
34.
Nikkel Corporation, a merchandising company, reported the following results for July:
Sales $464,000
Cost of goods sold (all variable) $173,500
Total variable selling expense $ 24,600
Total fixed selling expense $ 23,000
Total variable administrative expense $ 8,900
Total fixed administrative expense $ 38,200
The contribution margin for July is:
$257,000
$195,800
$402,800
$290,500
35.
[The following information applies to the questions displayed below.]
Bakker Corporation applies manufacturing overhead on the basis of direct labor-hours. At the beginning of the most recent year, the company based its predetermined overhead rate on total estimated overhead of $77,250 and 2,500 estimated direct labor-hours. Actual manufacturing overhead for the year amounted to $79,000 and actual direct labor-hours were 2,400.
The predetermined overhead rate for the year was:
$29.66
$30.90
$32.92
$31.60
Try it now!
How it works?
Follow these simple steps to get your paper done
Place your order
Fill in the order form and provide all details of your assignment.
Proceed with the payment
Choose the payment system that suits you most.
Receive the final file
Once your paper is ready, we will email it to you.
Our Services
Custom Writings Help is a Quality-Oriented Company in Online Writing as a result of hiring exceptional professionals to execute clients' tasks.
Essays
At Custom Writings Help,We understand the struggle of research paper writing, and that is why at Custom WritingS Help, we are all out to help you. We pride ourselves on having a team of clinical writers. The stringent and rigorous vetting process ensures that only the 'BEST' Writers are chosen for the job. We have highly qualified Ph.D. and MA writers working with us; we equally offer these experienced writers specific bonuses and incentives to make them deliver highly original, unique, and informative content at reasonably low prices.
Admissions
Thesis Writing Service
Worlwide, Many Masters Students are struggling with Thesis Completion. A thesis is likely to be the longest and most challenging piece of work a student has ever completed. However, unlike essays and other assignments, a student can pick a particular interest topic and work on their initiative. Fortunately, we are there for you. At Custom Writings Help, you are assured of an authentic, imaginative, informative, linguistically great, and advantageous thesis that adheres to all your needs. So, why continue considering different writers when you have discovered the best in the field?
Editing
Custom Papers
Not a single student can avoid writing custom papers. However, a total lack of experience, skills, and time makes it very hard to produce a superb writing piece. Therefore, if you are seeking professional help, turn to us. Our specialized and experienced writers compose a variety of model papers, including custom essays, college term papers, research papers, book reports, MBA essays, executive summaries, dissertations, Ph.D. theses, admission essays, and research proposals for college and university students at any level.
Coursework
Essay Writing
Most of the students disregard the critical principles of essay writing and compose papers below sensible guidelines. Therefore, with Custom Writings Help, one should not worry about his/her essay. Our Writers compose informative and engaging content on all complexities and topics. We write meaningful and smart essays while prioritizing all aspects that bring about a good grade, such as impeccable grammar, proper structure, zero-plagiarism, and conformance to guidelines.
Coursework
Coourse Work Writing
Don't let the seemingly never-ending onslaught of writing assignments get you down. If you are looking where to get course work assistance online, the writers at Custom Writings Help are here to assist you with all of your writing needs. We undertake to unique delivery of papers that meet the professor's requirements. The content is proofread, edited, and checked plagiarism before submission to customers. No matter how big or small your work is, we will deliver on time. Try US Now! !
Coursework
Dissertation Writing Service
High-Quality Dissertation Writing Services are rare. They require Ph.D. academicians – not easily found. However, are an exception. The years, time, and resources we have invested in the dissertation world has given us a competitive advantage over others. Choose to come to Custom Writings Help; You will find perfect Ph.D. consultants who have written hundreds of dissertations theses ready to help you. Let our dissertation-writing services help you craft your dissertation, for you are assured we will give you the results.